Densifier Ultralit Hard Eco

Can be applied to: concrete of any age
Excellent penetration: 2-8 mm on steel trowled concrete
Increases abrasion resistance by: 15-30%
Very fast application: minutes instead of days
Form: Clear liquid
Specific Gravity: 1.08
pH: 10-11
Solids Content: 8%
Active Content: 100% of total solids
VOC Content: < 20 g/L
Freeze Point: 0°C
Flash Point: Non Flammable
Shelf Life: 2 years in original, unopened package

Ultralit Hard Eco is a water-based lithium densifier used to densify, harden, dustproof new or existing concrete floors. Active lithium content of the product comes into chemical reaction with concrete components and form insoluble calcium silicate hydrate (CSH) that increases surface hardness, reduces dusting, makes maintenance of the floor easy. As the silicate-concrete chemical reaction is formed internally in upper layer of concrete, the protection of Ultralit Hard Eco is much more durable than traditional surface coatings and sealers, it will never peel or debond and is unaffected by moisture.

ESTIMATED COVERAGE RATES
Freshly placed uncured concrete: 15-20 m2/L (50-65 mL/m2).
Steel troweled cured concrete: 10-12 m2/L (85-100 mL/m2).
Cured honed / polished concrete: 10-15 m2/L (65-100 mL/m2).

Lithium content – up to 8%.
Active ingredients: 100% of total solids.
Fast hardening and dustproofing – days instead of months.
Can be applied to concrete of any age.
Excellent penetration: 2-8 mm on steel trowled concrete.
Increases abrasion resistance by 15-30%.
Does not contribute to surface ASR or promote crazing.
Good stain and water resistance.
Does not change floor friction coefficient – no change of slip resistance.
Very fast application: minutes instead of days.
Cost Effective solution – the least expensive densifying system per m2.
Absolutely “GREEN” and Planet Safe, water based, no VOCs

---